Quickly supply alternative strategic theme areas vis-a-vis B2C mindshare. Objectively repurpose stand-alone synergy via user-centric architectures.

FOLLOW US ON:

Get in touch!

Fusce varius, dolor tempor interdum tristiquei bibendum service life.

147/I, Green Road, Gulshan Avenue, Panthapath, Dhaka

ESP32 Universal IoT Dev Kit Sensing Pro 5 595x516
$40.00$47.00

ESP32 Universal IoT Dev Kit – Sensing Pro

This IoT Sense Kit Pro is an ESP32-based dev kit mainly designed to connect sensors to IoT-based systems. It has various sensors integrated into the board, such as Temperature, Humidity, Light Intensity, Pressure, Accelerometer, and Gyroscope. These sensors can detach from the unit and mount outside the board using wire extensions. Further, it has a range of I/O pins for connecting other sensors or actuators according to user requirements. The OLED display, buzzer and four push buttons are available for standard Input and Output. In addition, IoT Sense Kit Pro consists of an inbuilt real time clock and a Micro SD card socket. The unit can be programmed and employed using Arduino IDE, MicroPython and other Espressif chips compatible platforms such as ESP IDF. This module is ideal for researchers, engineers, and hobbyists in IoT and embedded system development. It is versatile enough to be used in R&D and perfect for 24/7 running applications and systems.

Available Options Product Specifications Applications of the Board
The options available in the IoT Sense Kit Pro are:

  • MCU: ESP-32
  • Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.
  • Support for both Classic Bluetooth v4.2 and BLE specifications.
  • Sensors: Temperature, Humidity, Light Intensity, Pressure, Accelerometer, Gyroscope
  • Input: 4×Pushbuttons
  • 17×GPIO pins (Follow original ESP32 functions)
  • Output: OLED display, Buzzer, LED
  • I2C: 4×5V I2C pins, 4×3.3V I2C pins
  • Voltage output pins: 4×3.3V/200mA, 4×5V/300 – 600mA
  • Inbuilt real-time clock (RTC)
  • Programmable square-wave output
  • Micro SD card socket
  • Tx0 and Rx0
  • USB Type-C port
  • USB-to-UART Bridge
  • Resettable Fuse
  • Power Mode Selector Switch
  • Compatibility with Arduino IDE, MicroPython, and other Espressif chips compatible platforms

Download the User manual

  • Name: ESP32 Universal IoT Dev Kit – Sensing Pro
  • MPN : GS3 ESP-32 IoT Unit for Sensing V2.0
  • Temp: 40 ~ 85 (℃)
  • Flash: 4 MB
  • PSRAM: 520 KB
  • Size: 110×70 mm
  • Antenna: PCB
  • Interfaces: I/O, I2C, One-wire, USB Type-C
This board can be employed in a wide range of applications, from R&D to industrial applications where IoT and embedded systems are in place. A set of application domains has been listed below. However, the module can also be utilized in many other fields.

  • Smart farming
  • Smart cities
  • Weather stations
  • Environmental monitoring systems
  • Autonomous robots
  • Security systems
  • Research
  • Teaching and learning
Weight 0.4 kg
Dimensions 14 × 10 × 3 cm
Sensors

With Sensors, Without Sensors

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop